Carefree of Colorado
14
M
ANUAL
O
VERRIDE
If power to the vehicle is not available, the awning can be safely retracted using
the manual override located on the idler (right) end of the case.
There are two configurations of the Freestyle
RM. The original configuration is identified by
the five (5) screws in the endcap. The current
configuration has 1(one) screw in the endcap.
NOTE:
This procedure cannot be used to extend the awning.
O
RIGINAL
C
ONFIGURATION
15. Remove the plug from the right
endcap and save.
16. Insert a 3/8" socket drive extension
and handle into the square drive
hole inside the end cap.
17. Turn the handle clockwise until the
awning is retracted.
18. Reinstall the plug
C
URRENT
C
ONFIGURATION
1. Remove the right outer endcap
and save.
2. Insert a 3/8" socket drive
extension and handle into the
square drive hole inside the
inner end cap.
3. Turn the handle clockwise until
the awning is retracted.
4. Reinstall the outer cap.
NOTICE
After closing the awning with the manual override, the lead rail
may move out from the case 1/4" -1/2". This is normal and the awning is secure
for travel until power is restored or repairs are completed. Do not attempt to
force the lead rail in with the override, serious damage can occur to the awning.
Original
Current
RMF046
RMF019a
3/8" Socket
Drive Extension
Remove
Cover
Remove Plug
RMF019
3/8" Socket
Drive Extension
Summary of Contents for BT12
Page 18: ...Carefree of Colorado 18 ...
Page 19: ...FREESTYLE RM AWNING 19 ...