Carefree of Colorado
8
Hanging the Front Panels
Lift the individual panels up and zip to the zipper insert.
For the larger window panel, use the hooks and rings to hold the panel in place
while zipping the panels.
M
OUNTING THE
S
IDE
P
ANELS
1. Open the adjustment lever on the room rafter and extend the rafter.
2.
For the Campout awning:
2.1. Lift the rear end of the rafter and insert into the same loop used by the
awning rafter.
2.2. Lift the front of the rafter up. Slide the end of the rafter into the lead rail
next to the awning rafter.
3.
For Freedom awnings:
3.1. Lift the rear end of the rafter and hook into the awning case. The rafter
end slides up into the case extrusion and then down to lock into place.
3.2. Lift the front of the rafter up. Slide the end of the rafter over the
protrusion in the lead rail.
4.
For Vertical Arm awnings:
4.1. Lift the rear end of the rafter and hook the bracket into the awning rail
beneath the awning fabric.
4.2. Lift the front of the rafter up. Extend the rafter until the roller tube end
presses the roller tube.
5. Extend the rafter for a snug fit then lock the lever.
6. Repeat for the other side.
7. Lift the side panel up and attach to the rafter using the straps on the inside of
the panel. The straps wrap around the rafter and snap closed.
8.
For box awnings:
Adjust the awning's vertical support legs until the side
panels hang straight.
9.
For vertical arm awnings:
Adjust the pitch until the side panels hang
straight.
10. Zip the front and side panels together.
11. At the top of the side panels fold the fabric between the rafter and the canopy.
12. Attach the clamps to the canopy. Adjust the straps for a snug fit.
13. At the bottom, fold the room panels inside or outside.
Ring on Zipper Insert
Hook on Panel
vac004
Insert (ref)
Panel (ref)
