CareFusion Alaris CC Guardrails 80033UND1-G Directions For Use Manual Download

Page: 24 / 40

1000DF00333 Issue 6

23/38

Configured Options

This section comprises of a list of options which are configurable. Some can be entered via the pump configuration menu (available in

Technician Mode) and others through the Guardrails® Editor Software.

Enter the access code on Alaris® CC Guardrails® Syringe Pump for Configured Options, see the Technical Service Manual for details.

Important: Access codes should only be entered by qualified technical personnel.

Use Guardrails® Editor to configure general options, drug library and units enabled for each profile and to configure Syringe Brands and

Models to be enabled.

Clock Set

1. Select

CLOCK SET

from the Configured Options menu using the

keys and press the

softkey.

2. Use the

keys to adjust the date displayed, pressing the

NEXT

softkey to access the next field.

3. When the correct time and date are displayed press the

softkey to return to the Configured Options menu.

Contrast

This option is used to set the contrast on the pump display.

1. Select

CONTRAST

from the Configured Options menu using the

keys and press the

softkey.

2. Use the

keys to select a contrast ratio value. The contrast of the display will change when scrolling through the numbers.

3. When the desired value has been reached press the

softkey to return to the Configured Options menu.

Language

This option is used to set the language of messages shown on the pump display.

1. Select

LANGUAGE

from the Configured Options menu using the

keys and press the

softkey.

2. Use the

keys to select the language.

3. When the desired language has been selected press

SELECT

softkey to return to the Configured Options menu.

1. Select

GENERAL OPTIONS

from the Configured Options menu using the

keys and press the

softkey.

2. Select the option you wish to enable/disable or adjust and press the

MODIFY

softkey.

3. When all the desired modifications have been carried out press the

QUIT

softkey.

4. Either select the next configuration option from the menu or turn the pump

OFF

, returning it to operation as required.

NURSE CALL FITTED

Enables

Nurse Call (hardware option).

NURSE CALL INVERT

When enabled, the nurse call output is inverted.

RS232 SELECTED

Sets the pump's communications to use RS232 (hardware option).

Alaris®

CC Guardrails® Syringe Pump General Options

Summary of Contents for Alaris CC Guardrails 80033UND1-G









































Search results

Summary of Contents for Alaris CC Guardrails 80033UND1-G

Reviews:

Related manuals for Alaris CC Guardrails 80033UND1-G

Brands by name

Popular brands

CareFusion Alaris CC Guardrails 80033UND1-G, Directions For Use Manual

Search results

Summary of Contents for Alaris CC Guardrails 80033UND1-G

Reviews:

Related manuals for Alaris CC Guardrails 80033UND1-G

Brands by name

Popular brands