9
“UE BASIC” +08C0042EZ - rel. 1.0 - 16.10.2017
ENG
1.7 Fitting the front cover
Models UE005 to UE015:
1
3
4
2
Fig. 1.gFig. 1.g
1.
urn the red oval-shaped plate with the CAREL logo, revealing the
fastening hole below;
2.
slip the cover onto the frame (keeping it slightly oblique), until it rests
on the rear edges, paying attention to the positioning holes on the
side;
3.
tighten the earth screw using a screwdriver;
4.
turn the red oval-shaped plate with the CAREL logo until covering
the fastening hole below.
Modelli UE025…UE065:
1
2
Fig. 1.h
1.
slip the cover/covers onto the frame (keeping it/them slightly raised
and tilted), until it rests on the rear edges;
2.
tighten the screws on the top of the humidifier using a screwdriver.
Important
: in models UE025 to UE065 open the electrical
compartment on the humidifier using the lock with slot.
Fig. 1.i
1.8 Components and accessories
Once having opened the packaging and removed the front cover of the
humidifier, make sure the following are included::
Ƒ
kit of screws with plugs for
wall-mounting
Ƒ
kit code
98C615P003
of connectors for the
electronic board
Ƒ
models UE025 to UE065
only
: code
FWHDCV0000
non-return valve with
connection pipe
Ƒ
models UE025 to UE065
only: angular plastic hose
(drain water connection).
.
