Knee and Joint Physiotherapy Unit
___________________________________________________________________________
_______________________________________
By Carepeutic®
7
8.
If you do not want heat therapy, choose to have only infrared therapy, press
DOWN
button to reduce temperature to its minimum level (40
℃
). And it'll work with only
infrared therapy.
9.
To turn off Infrared Heat function, Press
Start/Stop
button once again on control
panel. LED screen shows "--".
10.
Vibration Massage
:
•
Press the
On/Off Switch
to "-" or "o" position to turn On/Off vibration
massage.
•
Note: On/Off Switch is located on the left side underneath the massager.
11.
Infrared / Heat therapy
and
Vibration massage
are independently controlled.
Turning On/Off either one of the 2 functions will not affect another function.
Temperature increment:
1.
For temperature within 40℃ to 55℃, the unit increment is 5℃ every time you press
UP or DOWN button. From 56℃ to 65℃, the unit increment is 1℃.
Timer:
1.
The default time for infrared heat therapy is 30 minutes. It'll automatically shut off
after 30 minutes of use. You need to press
Start/Stop
button again on control panel if
you need more cycles.
2.
There is not default time for vibration massage. You can turn On/Off the vibration
massage any time.
Automatic Heating Temperature Balancing System:
1.
The device has built-in automatic heating temperature balancing system.
2.
The heating system starts after you set up the temperature. During heating, the green
indicator light is on and off alternatively.
3.
The heating system stops when the temperature reaches your preferred temperature
level, and the green indicator light is off.
4.
The heating system starts again when its temperature is lower than your preferred
level, and the green indicator light is on and off again. This cycle will continue and so
on.
How to put on the massager:
