1
Confirm the tens' digit by pressing Button 2 once briefly (hear the ‘confirmation-signal’).
Press Button 1 as often as needed, to reach the desired number for the hour’s unit (can be 0 to 9 if
the tens' digit is 0 or 1 and 0 to 4 if the tens' digit is 2). For ‘0’ do not press Button 1, because it is the
default setting. Confirm the unit by pressing Button 2 once briefly.
If the setting is carried out correctly, a “Confirm adjustment” signal is heard (1 long signal, 1 short
signal, 1 long signal, 1 short signal) otherwise an error signal (1 short signal, 3 long signals) is heard.
SET MINUTES MANUALLY (TWO DIGIT NUMBERS)
To set the minutes manually, press SHORT Button 2 + LONG Button 2 to enter the setting mode (hear
“Confirmation-signal”). Press Button 1 as often as needed to reach the desired number for the tens'
digit of the minutes (can be only 0 to 6). For ‘0’ do not press any button. Confirm the tens' digit by
pressing Button 2 once briefly (hear the ‘confirmation-signal’).
Press Button 1 as often as needed to reach the desired number for the units' digit of the minutes (can
be 0 to 9). For ‘0’ do not press Button 1 as it is a default setting. Confirm by pressing Button 2 once
briefly.
If the setting is carried out correctly, hear a “Confirm adjustment” signal (1 long signal, 1 short signal,
1 long signal, 1 short signal) otherwise an error signal (1 short signal, 3 long signals) is heard.
7.4.3 DATE – CALL UP & CHANGE
CALL UP DAY (press 3x SHORT Button 2)
To call up the day briefly press Button 2 three times. The day will be signaled as a two digit number.
E.g. ‘30’ will be signaled as three short signals (3) for the tens' digit and a wave (0) for units' digit.
CALL UP MONTH (press 4x SHORT Button 2)
To call up the month briefly press Button 2 four times. The month will be signaled as a two digit
number. E.g. ‘09’ as a wave (0) for the tens' digit and two long signals (4+4) and one short signal (1)
for units' digit.
CALL UP YEAR (LAST TWO DIGITS OF THE YEAR) (press 5x SHORT Button 2)
To call up the year, briefly press the Button 2 five times. The year is signaled as a two digit number,
e.g. ‘16’ represents 2016.
E.g. ‘16’ will be given as one short signal (1) for the tens' digit and one long signals (4) and two short
signals (2) for the units' digit.
SET DAY MANUALLY (TWO DIGITS)
To manually set the day, press 2x SHORT Button 2 + LONG Button 2 to enter the setting mode
(“Confirmation-signal” is heard). Press Button 1 as often as needed to get the desired number for the
tens' digit of the day (only 0, 1, 2 or 3). For ‘0’ do not press Button 1 as it is a default setting. Confirm
the tens' digit by pressing Button 2 once briefly (‘Confirmation-signal’ is heard).
Press Button 1 as often as needed to reach the desired number for the units' digit of the day (0 to 9 if
the tens' digit is 0, 1 or 2 and 0 or 1 if the tens' digit is 3). For ‘0’ do not press Button 1 as it is a default
setting. Confirm the unit by pressing Button 2 once briefly.
