2012 Cargo Floor B.V. Coevorden, Holland
Versie 01/11-01-2012
www.cargofloor.com
info@cargofloor.com
Cargo Floor B.V.
P.O. Box 271
NL-7740 AG Coevorden
Phone: +31-(0)524-
593900
Fax: +31-(0)524-
593999
Blz. 68
GB
CARGO FLOOR TECHNICAL SPECIFICATIONS
System operation
:
completely hydraulic, with three double-action cylinders.
System control
:
completely hydraulic mechanical.
Operation control
:
fully automatic loading – stop - unloading.
CF500 SL-2
CF100 SL-2
Bore (mm)
100
80
Piston rod diameter (mm)
45
35
Stroke (mm)
200
150
Cylinder volume (ltr.)
2.82
1.36
Oil volume per cycle (ltr.)
8.46
4.09
Over pressure valve threshold, max. operational pressure (bar)
225
175
Strokes per minute with advised pump capacity
13
17
Speed (mtr. / min) with advised pump capacity
2.6
2.6
Advised pump capacity:
Flow (ltr./min)
110
70
Pressure (bar)
250
200
Max. pump capacity:
Flow (ltr./min)
130
80
Pressure (bar)
250
200
Speed at maximum pump capacity (mtr. / min.)
3,1
2.9
Control valves
: 24V DC
Throughput variation
: Completely variable speed by use of oil flow determined by the revs of the motor
or by various pumps. Pay attention to the diameter of the choke, see page 25.
Drive
: use of the PTO/pump on the truck; an electro-hydraulic aggregate or an hydraulic
aggregate with an external combustion engine.
Filter
: pressure filter type: high-pressure 10 micron (part number7372005).
Pressure piping
: Ø 20 x 2 feed through 16 mm
Return piping
: Ø 25 x 2,5 feed through 20 mm
Oil ISO VG 32 b.v.
: Shell Tellus T32 or BP HL2-32 or ESSO Univis 32 (or equivalent).
Only use biological oil after agreement by Cargo Floor
Biological oil
: A biological oil of the type synthetic ester (HEES) can be used as standard with
the Cargo Floor system.
We advise you not to use other types of biological oil.
Oil temperature
: max. 70 ° C
Floor
Aluminium floor profiles
:
- plank length negotiable
- floor thickness 3, 6, 8, 10, HDI 8/18 mm. HD 8/20 mm; Semi Leak Proof.
- profile width 111,9 mm / double seal profile 114,8 mm
- moving floor width standard 2.355 mm for an inner width of 2.500 mm
Extrusion alloy
: high quality Aluminium-alloy, weldable, very wear-proof and tensile
Guiding
: The aluminium floor profiles are borne by wear-free plastic guides (TWISTER) or
by plastic guide cams. See figure 13A , page 29.
Guide bearing surface
: the total bearing surface of each guide (TWISTER) is 87 cm
2
Total bearing surface of each guiding block of the plastic cam guide is 60
cm
2.
Total guide surface area is determined by the total number of guides,
which can be varied as required.
Under floor
: Steel as well as aluminium. The plastic guiding can be provided with square tubes
25x25x2 or the plastic cam guides can be mounted directly on the under floor.
