Set wireless remote control (CF RX TX)
3 functions
Cargofloor.com
Page 7
Version 01 / 05-07-2021
MOUNTING THE RECEIVER (CF RX) 3 FUNCTIONS IN THE CONTROL BOX
Attention!
The screw holes in the corners of the mounting plate must be on
the underside.
Mount the receiver with the 4 M4x15 bolts and locknuts on the mounting
plate with the gland/cable entry of the receiver at the bottom.
Then screw the mounting plate with receiver onto the domes in the control box using the 4 4x14 screws.
Then connect the Hirschmann plug to the fixed switch CF7 or CF3.
Top
Bottom
