260 BSA
23
Daily Manitenance
•
Clean the machine from the chips after
working.
•
Check if the blade has worn or has
broken teeth.
•
Check if all the emergency buttons work
normally.
Weekly Maintenance
•
Clean carefully the machine and the
basement hole for the passage of
cooling water.
•
Clean the blade-guide from the chips.
•
Remove the frame carter, clean the
pulleys and the blade path from the
chips.
Monthly Maintenance
•
Remove the electro-pump and clean the
filter.
•
Check and re-fill the cooling water if
necessary.
•
Clean and lubricate all the mechanical
parts
•
Change completely the cooling water.
Yearly Maintenance
•
Check the widia inserts and turn them
or replace them if worn .
•
Check the frame springs and eventually
substitute them.
•
Check the oil level of the reduction box
e when necessary refill the oil until the
indicated level. Type of oils suggested:
AGIP OSO 46
BP HPL 46
ESSO NUTO H46
SHELL TELLUS OIL ST46
6.2 Scheduled maintenance
Before performing any maintenance activity on the machine remove tension
and verify that on the machine thare are no pieces from cutting operations.
For a optimum performance of angle reading and to prevent any risk of not
functioning, please always clean the magnetic tape and sensor positioned
on the graduated scale.
Summary of Contents for 260 BSA
Page 2: ...260 BSA...
