260 BSA
5
1. Introduction
1.1 General safety and mandatory instruction
1.2 Safety Devices
The instruction manual is a very important
item of your equipment. It states all the
rules and guides to efficiently operate the
machine.
It is kindly suggested to familiarize with
the main functions reading carefully this
manual.
CARIF machines are equipped with safety
devices.
It is however important that the operator
runs the machine carefully to avoid any
dangers.
The machine is equipped with the following
safety devices: and symbols. These must be
EMERGENCY STOP switch
Electrical overload protection
Electrical locking
Saw blade covers
Operating the machine without using the provided safety devices may lead to
serious injuries. It is essential for the operator to run the machine carefully to avoid
any risks.
All functions of the band saw are stopped
immediately.
Motors are turn off in case of overload.
If bow carter is open the saw blade will
stop.
The saw blade is cover completely, only the
cutting area accessible.
All the instruction in this manual must be
followed in any moments during the usage
and maintenance of the machine.
CARIF reserves itself from eventual bad
situations caused to people or damages
caused to the machine without following
this instruction manual.
Each person who will installing, operating,
servicing or repairing at the customer’s
facility must have read and understood the
instruction manual.
always cleaned and to be substituted when
detached.
SAFETY DEVICES
FUNCTION
Summary of Contents for 260 BSA
Page 2: ...260 BSA...
