260 BSA
6
In spite of all safety devices all the machines are potentially dangerous.
Further dangers must be carefully controlled.
•
The clamping may cause serious injuries if obstructed on their way
•
The saw blade may cause serious injuries if obstructed during the
cutting
•
The saw frame may cause serious injuries during its down stroke
•
The saw band may cause injuries during replacement
To reduce to minimum this risk please read the following general
rules:
•
Only authorized personnel should operate the installation.
•
Machines repairs or any changes to the machine or installation
without specific instruction are prohibited.
•
The operator must take care that nobody gets near to the moving
parts of the machine during cutting.
•
Only when machine is turned off should any adjustments or set-up
operation be performed.
•
Wearing gloves when replacing the saw band.
•
Wearing gloves when cleaning the machine especially if using air/
water flushing guns.
•
If maintenance work or repairs need to be performed turn off the
main switch. Before opening any Hydraulic or Electrical lines be
sure the system is without pressure and electricity.
ATTENTION!
Operating the machine without paying attention to the safety rules
may lead to very severe injuries. It is essential for the operator to run
the machine carefully to avoid any risks.
Summary of Contents for 260 BSA
Page 2: ...260 BSA...
