lb-05073-04-EN
Pag. 7
30/09/14
Place back the master board cover.
Insert the inlet milk pipe into the pass
bulkhead, and then trough the side
panel hole.
Place back the left hand side
panel.
Insert the milk inlet pipe into the
fridge side panel hole.
Insert the milk inlet pipe through the
hole in the lid of the milk tank.
Connect the power cord on the
basement fridge socket and the fridge
serial wire to the machine
Place the tank inside the fridge with
the reed milk level as shown in the
picture. The tank must be pushed
until it touches the bottom of the
fridge.
The reed milk level must be
placed
in its
seat of the tank with the black top
upward and the base with
sign downward.
Make sure that the serial
cable is fixed as in the photo and
does not come into contact with
the supporting table
Summary of Contents for A01-PLUS -V2
Page 14: ...lb 05073 04 EN Pag 14 30 09 14 ...
