ENTER SETUP MODE
SETUP FLOW CHART
Pull the Throttle Trigger to Max. Forward
position to toggle Battery type
Display
CURRENT
Battery type instantly
RED LED ON = LiPO Battery
BLUE LED ON = NiHM Battery
RECEIVER UNIT (MRS-540BL) FUNCTIONS
1
5
1
2
4
Power ON the Transmitter
BLUE LED ON
(Indicate “Select Battery Type”)
HOLD the Throttle Trigger to
Max. Forward Position
Power ON Receiver Unit(MRS-540BL)
3
HOLD the Throttle Trigger until
RED & BLUE LED
Alternatively
Flashing with a “BEEP” sound
Release Throttle Trigger
BATTERY TYPE SELECTION MODE
RED LED ON
(Indicate “Calibration Mode”)
CALIBRATION MODE
CALIBRATION MODE
RED and BLUE LED ON
(Indicate “Select ESC Mode”)
ESC SPORT / RACING MODE
ESC SPORT / RACING MODE
2
Pull the Throttle Trigger to Max.
Forward position and then release
After
4 Second
After
4 Second
Neutral
Position
Flashes
3 times with
3 “BEEP”
Sound
Power OFF the Receiver Unit to Escape
from Setup mode.
4
Pull the Throttle Trigger to Max. Forward position.
RED LED OFF and BLUE LED Flashes
Then
BLUE LED OFF
and
RED LED FLASHES
Pull the Throttle Trigger to
Max. Forward position.
RED LED SOLID ON
with a
“BEEP”
sound and
BLUE
LED FLASHES
Max Forward has been set.
Push the Throttle Trigger to Max. Reverse position.
RED and BLUE LED SOLID ON
with a
“BEEP”
sound.
Max. Reverse has been set.
Release Throttle Trigger to
Neutral position
BLUE LED SOLID ON
with a
“BEEP”
Sound, then
Throttle Neutral Position has been set.
Release Throttle Trigger to Neutral position
RED and BLUE LED FLASHES 3 times with 3 “BEEP” sound
.
Calibration has been completed.
Pull the Throttle Trigger to Max. Forward position to toggle ESC mode. When
ESC mode is selected,
RELEASE
Throttle Trigger.
After 4 second
,
RED and BLUE LED FLASHES 3 times with
3 “Beep” sound
. ESC mode setup has been completed.
Power OFF the Receiver Unit to
Escape from Setup mode.
Power OFF the Receiver Unit to Escape
from Setup mode.
6
Display
CURRENT
ESC Mode instantly
Sport Mode : BLUE LED ON =
Forward/Reverse with Smart Brake
Racing Mode : BLUE LED FLASHES =
Forward Only with Brake
APPROX 2 sec.
APPROX 2 sec.
APPROX
2 sec.
1. When Battery type has been Selected,
RELEASE
the Throttle Trigger to
Neutral position
.
2.
After 4 second
, selection made with
RED and BLUE LED Flashes 3 times
with 3 “BEEP“ sound
, Battery Select has been completed.
2
3
“BEEP”
5
4
3
1
6
1
2
5
4
3
Pull
Neutral
Position
Pull
“BEEP”
Flashes
Flashes
Push
Neutral
Position
Flashes
3 times with
3 “BEEP”
Sound
Flashes
Flashes
2
4
1
3
Sport Mode
Sport Mode
Pull and
Release
Racing Mode
Racing Mode
Neutral
Position
Flashes
3 times with
3 “BEEP”
Sound
After
4 Second
After
4 Second
If fail to Bind, suggest to repeat from begin to try again
“BEEP”
“BEEP”
