42
Insert formed wire maingear struts in fuse. Position
nylon landing gear straps; then mark, drill, and mount
with #2 x 5/16" screws (see sketches above and illustra-
tion on page 10).
Press one of the four steel collars into the pocket in the
nylon steering arm (side holes must be aligned). Thread
#6-32 x 3/16" socket head screw in a few turns.
Install nosegear strut in bearing and steering arm (refer
to illustration on page 10). Tighten socket head screw
with Alien wrench.
Install wheels on axles as shown: eyelet first, wheel,
then wheel collar and set screw.
FUEL SYSTEM
Assemble your fuel tank per manufacturer's instructions.
Refer to full size views on plan, and install fuel tank and
lines. Support bottom of tank with foam rubber.
Attach the fuel line (leading from the "clunk" weight
inside the tank) to your engine's carburetor. This is also
the line to use for fueling. You simply slip the line off the
engine, fill the tank, and re-connect line to engine.
OPTIONAL PRESSURE FEED
If your muffler has a fuel-line type fitting on it, you can
use it to "pressure feed" fuel to the engine for smoother
and more reliable running, In this case, the vent line is
connected to the muffler fitting.
Summary of Contents for Eagle 2
Page 28: ...27 ...
