DPM III xi
English
87
Print Settings
Keys:
Key:
Speed:
Value range: 50 mm/s
… 450 mm/s.
Contrast:
Value range: 10%
… 200 %.
Key:
Ribbon control:
Examination if the transfer ribbon roll is to end or if the ribbon was torn at the unwinding roll.
Off:
The ribbon control is deselected, i.e. the direct print module continues without an error
message.
On:
The ribbon control is selected, i.e. the current print order is interrupted and an Error
Message appears at the display.
strong sensibility:
The direct print module reacts immediately to the end of the transfer
ribbon.
weak sensibility:
The direct print module reacts at approx. 1/3 more slowly to the end of the
transfer ribbon.
Key:
X displacement:
Indication of displacement in X direction. The fields on the layout are moved.
Value range:
−90.0 … +90.0.
Machine Parameters
Keys:
,
Key:
Mode:
Selection of operating mode.
Key:
Back-Speed:
Indication of back speed of the print mechanics after print end in mm/s.
Value range: 50
… 500 mm/s.
Key:
Print Offset:
Distance of the layout to the zero point of machine.
Value range: 1
… 999 mm
Key:
Layouts/cycle:
Indication of number of printed layouts per print start (cycle).
Value range: 1
… 25 layouts per cycle.
Key:
Ribbon speed:
Indication of ribbon speed in %.
In this mode it is possible to set the ribbon speed relative to the print speed. Because of a less
speed of the ribbon you can reduce the consumption of ribbon.
Value range: 50%
… 100%.
Key:
Service position:
Indication of position in 1/10 mm steps in which the print unit can be moved in times of service.
In the main menu click key
to move the print unit in service position. Press key
to move
the print unit again to zero point of machine.
Summary of Contents for DPM III XI
