SPX II Series
Options
03.17
Operating Manual
63
After the tag recognition is finished the customized information is to be
confirmed with key
to return to the previous menu.
Press key
to arrive at the next menu item.
Indication of interface settings.
NOTICE!
The settings should not be changed because the ideal setting is
effected automatically.
Press key
to arrive at the next menu item.
Settings for error handling.
Press key
and
to change between the different error reactions.
Print stop:
The print module stops after each RFID error (tag could not be
programmed).
Marking:
In case of an error the label is marked with sample.
Ignore:
Errors caused by unsuccessful tag programming are 'ignored'. The
label is printed. However, the error is logged in the RFID statistics.
Press key
and
to change between the settings error or number
of attempts.
Press key
and
to specify the number of attempts, how often
the RFID unit tries to write on the tag before an error is released or
before the print order is cancelled.
Press key
to arrive at the next menu item.
Setting the sending power of the RFID write/read unit.
Press key
and
to change the value.
NOTICE!
The adjustment of this value requires more special knowledge of
the used hardware. The indicated value does not have to be
changed normally because it affects the function of the write/read
module. Changing can lead to the fact that RFID tags cannot be
programmed any longer.
Press key
to save the current settings permanently.
