Vario III Series
Function Menu
11.13 Operating
Manual
51
Press key
to arrive the next menu item.
Indication of printhead temperature. The printhead temperature
corresponds normally to the room temperature. In case the maximum
printhead temperature is exceeded, the current print order is
interrupted and an error message appears at the printer display.
Press key
to arrive the next menu item.
This function is often used for high printing speed as the tearing of
transfer ribbon can be prevented.
The higher the '++' value is set, the slower the feeding motor is
accelerated.
The smaller the '
−−
' value is set, the faster the feeding motor is
decelerated.
Press key
to arrive the next menu item.
Settings:
Printout of all printer settings such as speed, label and
transfer ribbon material.
Bar codes:
Printout of all available bar code types.
Fonts:
Printout of all available font types.
Press key
to arrive the next menu item.
Indication of input signal level
0 = Low
1 = High
Port
Function
1 = Print
start
2 = Cut
3 = Counter
Reset
4 = External synchronisation of label position
5 = No
function
6 = No
function
7 = No
function
8 = No
function
Press key
to arrive the next menu item.
Indication of input signal level
0 = Low
1 = High
Port
Function
9 = Error
10 = Print order active
11 = Label at dispenser photocell - at dispenser photocell
12 = Print
end
13 = Ready
14 = RFID error - option RFID only
15 = Scanner: bar code not readable - option scanner only
16 = Transfer ribbon prior warning
Printhead temperature
Motor Ramp
Print examples
Input
Output
