Vario III Series
Options
11.13 Operating
Manual
61
7.4 RFID
Switch on the label printer and the display shows the main menu.
Press key
to access the function menu.
Press key
as long as you arrive the
RFID
menu.
Press key
to select the menu.
Press key
and
to set the operating mode of RFID hardware.
In order to program a RFID tag the setting must be On.
Press key
in On mode to activate the hardware. The setting
remains also when switching the print module Off.
After a successful activation the availability of RFID module is
indicated. The menu is not available if no RFID hardware was
recognised.
Press key
to access the RFID menu.
Indication of RFID module type, frequency range (HF, UHF) and used
frequency.
Press key
to arrive the next menu item.
The menu item Tag information contains several sub-functions.
Press key
to indicate the tag number.
Indication of tag identification number (TID) or 'no RFID tag' if no tag
was recognised.
For UHF Class 1 Gen2 tags the EPC is indicated.
Press key
to return to the menu item Tag information.
Press key
to arrive at the next sub-function and then press key
to select the function.
Indication of tag storage allocation.
This information can be used to assure that the tag was programmed
correctly.
Press key
to return to the menu item Tag information.
Press key
to arrive at the next sub-function and then press key
to select the function.
Indication of tag type.
