Error correction
Vario III Series
88 Operating
Manual
11.13
Error message
Cause
Remedy
46 Drive
write-
protected
Memory card is write-protected. Deactivate write protection.
47
Directory not file
Attempt to indicate a directory
as file name.
Correct your entry.
48
File already open
Attempt to change a file during
an access is active.
Select another file.
49 No
file/directory
File does not exist on CF card.
Check file name.
50
Invalid file name
File name contains invalid
characters.
Correct entry of name, remove
special characters.
51
Internal file error
Internal file system error.
Please contact your distributor.
52 Root
full
The max. number (64) of main
directory entries is reached.
Delete at least one main
directory entry and create
subdirectories.
53 Drive
full
Maximum CF capacity is
reached.
Use new CF Card, delete no
longer required files.
54 File/directory
exists
The selected file/directory
already exists.
Check name, select a different
name.
55
File too large
During copying procedure not
enough memory space onto
target drive available.
Use a larger target card.
56
No update file
Errors in update file of
firmware.
Start update file anew.
57
Invalid graphic file
The selected file does not
contain graphic data.
Check file name.
58
Directory not empty
Attempt to delete a not empty
directory.
Delete all files and sub-
directories in the desired
directory.
59 No
interface
No CF card drive found.
Check connection of CF card
drive.
Contact your distributor
60
No CF card
No CF card is inserted.
Insert CF card in the slot.
61 Webserver
error
Error at start of web server.
Please contact your distributor.
62 Wrong
FPGA
The direct print module is
equipped with the wrong
FPGA.
Please contact your distributor.
63 End
position
The label length is too long.
The number of labels per cycle
is too much.
Check label length res. the
number of labels per cycle.
