Lett
460
I
INSTRUCTIONS
22
Initial installation
In order to use the product properly, we advise
you to read and closely follow the assembly
steps that appear below.
1) Manually unfold the chassis until the base
opens. To do this, unlock the safety catch.
2) Press the side buttons on the handle to unfold
and separate from the chassis.
3) To install the
brake, use the foot
buttons to install the
axle through the
trolley’s two rear
vertical bars.
IMPORTANT: It is
essential to check
that the foot buttons
are located in the furthermost rear position of the
chassis. In this way you will know the axle has
not been installed the wrong way round. Check
the diagram in order to ensure installation has
been correctly carried out. (see image no. 1)
4) To attach the bag:
Image 1. Brake installation
4.1) Attach it to the upper bar of the chassis
using the upper Velcro strip.
4.2) Then, attach it to the base of the chassis
via the three Velcro strips on the lower part
(one front and two side).
4.3) Finally, attach it to the central bar via
the remaining Velcro strip.
5) In order to attach the front wheels, simply
insert the corresponding wheel blocks at the
ends of the front vertical bars until you hear a
clicking sound.
6) To attach the rear wheels, press the central
button of each wheel and insert fully into the
axle. Apply pressure until you hear the clicking
noise, which will let you know they have been
correctly installed.
Once completed, the shopping trolley will be
ready to use.
Lett460, natural elegance
A trolley that comes with the best features.
Manufactured from aluminium, it is both agile
and versatile making this an ideal shopping
partner. The anti-roll bar provides additional
Summary of Contents for Lett460
Page 1: ...Lett460 es ca en fr de it...