Model 301GAS burner — Instruction manual
Carlin part number MN301GAS Rev. 11/24/14
– 20 –
Where appliance instructions differ from this manual, follow the appliance instructions.
9. Replacement parts – Burner
Item
number
Description
Part
number
1
Air tube with gasket and flanged door assembly; welded appliance flange shown (specify
appliance application and overall length of air tube) — “B” and “C” combustion head/tube
assemblies available
Consult factory
2
Gas manifold (specify overall length of air tube and input range required)
Consult factory
3
Flanged door nuts (four required)
28357
4
Blower housing (with scroll extension and pressure augmenter)
NA
5
Air band (four-slot)
47001S
6
Air shutter, low input range (“B” head/tube)
Air shutter, mid input range (“C” head/tube)
99254
99278
7
Blower wheel, 5¾“ diameter x 4“ deep
28563S
8
Motor, Carlin PSC, 1/6 hp, 3450 RPM
98611S
9
Combustion head assembly, “B” head
Combustion head assembly, “C” head
99164
99277
10
Electrode/flame rod bracket assembly
99153KIT
11
Ignitor electrode
99158
12
Flame rod
99161
13
Airflow switch and mounting plate assembly (sensing lines not shown, but included with kit)
98521KIT
14
Door interlock switch and mounting screws
99261KIT
15
Ignitor, Carlin electronic Model 41800
4180002C
16
Burner junction box, 4" x 4", with grommet, lock washer, conduit nipples (to burner housing)
99198KIT
17
Primary control, Carlin 60200FR microprocessor flame rod control
602002FR943S
18
Optional adjustable forced draft flange
99255
