EN
NOTE
Depending on hose length, larger I.D. hose may be required. Install an air gauge at the gun handle.
When gun is triggered on, adjust regulated pressure as required. Do not use more pressure than is
necesarry to atomize the paint or coating being applied. Excess pressure will create additional
overspray and reduce transfer efficiency.
SPRAY GUN MAINTENANCE & CLEANING
If quick connect couplings are required, use only high flow quick connects. Other types will not flow
enough air for correct gun operation.
NOTE
To clean air cap and fluid nozzle, brush exterior with a stiff bristle brush. If necesarry to clean cap
holes, use a broom straw or toothpick if possible. If a wire or hard instrument is used, extreme care
must be taken to prevent scratching or burring of the holes which will cause a distorted spray pattern.
To clean fluid passages, remove excess material, then flush with gun wash solution. Wipe the gun
exterior with a dampened cloth. Never completely immerse in any solvent or cleaning solutions as
this is detrimental to the lubricants and life of the spray gun.
SB-E-2-996 R1.0
10/24
www.carlisleft.com
Summary of Contents for DeVILBISS 905038
