EN
Turn locking cam fully to the
lock position using a 5mm key.
Locking cam has not been
tightened.
Locking Cam has worn.
Replace using cam service kit
AGMDPRO-406-K
Spray gun is loose when
assembled onto intermediate
plate.
ASSEMBLY FAULTS
CAUSE
CORRECTION
Spray gun does not locate onto
intermediate plate.
Locking cam is not in the unlock
position
Turn locking cam to the unlock
position using a 5mm key.
Turn locking cam to the unlock
position using a 5mm key.
Spray gun cannot be removed
from intermediate plate.
Locking cam is not in the unlock
position
SB-E-2-990 R6.0
20/24
www.carlisleft.com