16430 N. Scottsdale Road, Suite 450, Scottsdale, Arizona 85254 / Office
:
480.781.5250
4.
Using a 10mm wrench remove fluid tip inspect for damage and
clean. Use gun-cleaning brush if necessary to remove paint
from air and fluid holes.
5.
Remove black air separator seal, clean, inspect for damage. If
necessary clean gun head interior with gun-cleaning brush. It
may necessary to remove the packing nut to thoroughly clean
fluid passage.
6.
Reassemble gun. Make sure separator seal and fluid tip are in
place before needle is inserted back into the gun.
Tightening fluid tip while needle is in place will cause damage
to needle