Eos –Gate Installation and operation manual
All the information provided with this document are property of Carlo Gavazzi Controls SpA
27
7.8 A50 - Uploading configuration to the Fat Spaniel® Portal
1
Use case name
Uploading configuration to the Fat Spaniel® Portal
2
Use case ID
A50
3
Description
This use case covers the upload of the plant configuration to the Fat
Spaniel® portal. This is the action which builds the system on the
remote monitoring web portal. Pay care to plan, execute and check
this action correctly because a wrong upload may cause problems in
the following monitoring
4
Use case goal
The eos-Gate successfully uploads the plant configuration to the Fat
Spaniel® Portal
5
Primary actors
Eos-Gate, User’s PC, Fat Spaniel®
6
Secondary actors
Internet
7
Pre-conditions
•
All steps from A1 to A49 OK
8
Post-conditions
Success end conditions:
•
The Eos-Gate’s configuration is uploaded to Fat Spaniel® portal
Failure end conditions:
•
The Eos-Gate’s configuration cannot be uploaded to Fat
Spaniel® portal
9
Trigger
10
Scenario description
•
Carefully check the configuration data for “PV-Plant, “Eos-
Array”, “AC meter” tabs
•
Carefully check of having correctly completed all the previous
steps (from A1 to A49).
•
Choose “Create Plant into portal”
•
Check the action’s result
11
Special
requirements
Note: Only some of the uploaded configuration data may be edited
in the Fat Spaniel® Portal at a second time. Wrong configuration
data uploaded may cause problems in the monitoring features.
It is not possible to overwrite an uploaded configuration with a new
configuration.
For these reasons it is important to be particularly careful with this
phase.
Please read the relevant Fat Spaniel® documentation for further
information regarding data editing in the portal
12
Information
