Eos –Gate Installation and operation manual
All the information provided with this document are property of Carlo Gavazzi Controls SpA
30
7.11 A110 – Checking RS-485 network
1
Use case name
Checking RS-485 network
2
Use case ID
A110
3
Description
This use case covers the RS-485 checking guidelines in the case of
connectivity related problems
4
Use case goal
The Eos-Gate is successfully connected to RS-485
5
Primary actors
Eos-Gate, User’s PC
6
Secondary actors
RS-485 bus
7
Pre-conditions
8
Post-conditions
Success end conditions:
•
The Eos-Gate is successfully connected to RS-485 bus
Failure end conditions:
•
The Eos- Gate cannot be successfully connected to RS-485
bus
9
Trigger
A10, A15
10
Scenario description
•
Carefully check correct cable type being in use
•
Carefully check for a correct physical connection
•
Carefully check for a correct network topology
•
Carefully check for RS-485 grounding
•
Check for RS-485 issues on every device in the LAN path under
exam
11
Special
requirements
Note: for further information about the solution of LAN related
issues, please read the appendix “MODBUS over RS-485 serial
line” at the end of this document
12
Information
