Carlson Handy 22100 Instructions Download

Page: 2 / 4

1. Remove all contents from packaging (FIG 1).

2- Fasten bottle jack to jack plate as shown (FIG 2). Use provided 5/16 bolts, lock washers, and nuts. The
release valve on the jack should point towards the caster mounts end of the frame.

Summary of Contents for Handy 22100

Page 1: ...e in manufacture or workmanship will be replaced or put in good operating condition This warranty does not apply to damage resulting from accident improper installation repair operation or maintenance...

Page 2: ...contents from packaging FIG 1 2 Fasten bottle jack to jack plate as shown FIG 2 Use provided 5 16 bolts lock washers and nuts The release valve on the jack should point towards the caster mounts end...

Page 3: ...the two 3 bolts mount the jack arm to the front H frame as shown The head of the bolts must be towards the bottle jack Install the 3 nylon washers followed by the safety lock arms Lastly the 1 2 nyloc...

Page 4: ...ur hand on the pedal just to make sure jack stays in position until you feel the jack taking the weight of the motorcycle Then you can pump jack with your foot NOTE Maximum load is 1500 lbs 3 Once bik...

Brands by name

Search results

Summary of Contents for Handy 22100

Reviews:

Related manuals for Handy 22100

Brands by name

Popular brands

Carlson Handy 22100, Instructions

Search results

Summary of Contents for Handy 22100

Reviews:

Related manuals for Handy 22100

Brands by name

Popular brands