P a g e |
31
•
Date
: the date is set in the factory but can be reset by the user: see section 6.8. The date and time are
displayed in the international standard notation: YYYY MM DD / HH:MM:SS.
•
Time
: the time is set in the factory but can be reset by the user: see section 6.8. The time is displayed in
the 24 hour format.
•
Last-hit mode status
: A greyed out ‘L’ symbol indicates that last-hit mode is turned off; a red ‘L’ on a black
background indicates that last-hit mode is turned on.
•
Battery status
: gives a colour-coded representation of the battery status.
o
Green
: more than 50% charge
o
Orange
: more than 15% charge
o
Red
: less than 15% charge. You should consider changing the battery, as the time remaining will
be unpredictable. The instrument shuts down when the voltage from the lithium-ion battery drops
to approximately 12.5 V (if a lead acid battery is being used, this figure will be approximately 10.8
V).
The battery status also shows ‘Li’ or ‘Pb’, depending on whether a lithium-ion or lead acid battery is being
used.
•
Red dot pointer status
: a black circle indicates that the red dot pointer is turned off; a red circle indicates
that the red dot pointer is turned on.
6.4 Point and shoot mode
On selecting
Point and shoot mode
, the user input screen appears.
Enter these values as required, then press
ENTER
.
The
Point and shoot
survey screen appears.
Figure 31 Code and target height entry
Summary of Contents for Quarryman Pro
Page 2: ......