3
www.CarnivalKingSupplies.com
.
||||| info@carnivalking.com
Ice Shaver Machine Manual
Installation and Operation Instructions
1. Place the Ice Shaver machine in a place where it cannot be pushed off the counter.
2. Keep the area at the front of the Ice Shaver clear for unobstructed access during operation.
3. Keep unit and power cord away from open flames, electric burners, or excessive heat.
4. Do not use an extension cord with this equipment.
5. NEVER allow any foreign or metallic objects around the shaver area or inside the hopper. Ice picks, scoops, and debris
that may be in the ice can damage the blade.
6. Connect drain hose to front of unit. Drain hose funnels excess water to floor drain or basin tub.
Ice Shaver Machine Specs
Item #
382ICS250
Overall Dimensions
11.5"W x 13.75"H x 17"D
Hopper Capacity
4 lb.
Frame Material
P Aluminum
Horsepower
1/3 HP
RPM
1440 RPM
7. This unit comes with an optional foot pedal switch for operating the unit. It should be located so it will not be a trip hazard
or in an area of heavy traffic.
a. Do not leave foot switch accessible to inadvertent operation when left unattended or when not being used.
b. Turn Foot Pedal Power Switch OFF (located on the back) when ice shaver is not in use.
c. Do not bypass any machine or equipment safety features to use this foot switch.
d. Replace damaged cord immediately.
Capacity
Up to 500 lbs. Per Hour
Wattage
250W
Voltage
120V
Amps
3.5A
Hertz
60Hz
Phase
1
Plug
NEMA 5-15P
Function and Purpose
This unit is intended to be used for shaving and crushing ice in commercial foodservice operations only. It is not intended
for household, industrial, or laboratory use.
Before using this equipment, it must be cleaned and
dried thoroughly
. Clean all surfaces before use. Failure to clean
surfaces before using the unit could cause food contamination.
This ice shaver is intended for shaving ice cubes for use in shaved ice (i.e. Hawaiian Ice), sno-balls, and/or iced beverages;
ice cubes should be a maximum of 2 inches in diameter. Larger pieces should be broken up before processing through the
machine. Your Ice Shaver machine has a 4 lb. hopper and can produce up to 500 lb. of ice per hour.
