Y PRO SYSTEM UPGRADE
TOOL
STEPS DEMONSTRATION
Please format the U disk as the formation below firstly.
Firstly, you have to unzip the Carobotor_dashboard.zip file, and
then copy the update directory and PLATFORM_CARD.mxnmcu
file to your disk that is in the directory you unziped.
Please plug your U disk in the usb port of your dashboard,
then long press the A key as the picture shows , and short
press the A key to switch to System upgrade window .
Long press B key to lock the current window until a red frame appears on the current window
as picture 1 ,then release the B key and long press B key again until you can see the system will
restart upgrade.
When the progress bar is full, please remove the U disk and
the system will restart automatically within two minutes.
U DISK
CAPACITY:
8/16G
FAT32
32KB
FILE FORMAT:
UNIT:
System upgrade
MCU upgrade
Device Info
CaRobotor OS
v5.1
Long press “B”to update system!
System upgrade
MCU upgrade
Device Info
CaRobotor OS
v5.1
System will restart to upgrade...
Long press “B”to update system!
System upgrade
MCU upgrade
Device Info
CaRobotor OS
v5.1
Long press “B”to update system!
(If the system can’t be automatically restart after 2 minute,
please pull out the key and press the lock button,then restart
the vehicle after 1 minute.)
<1>
<2>
<3>
<4>
System upgrade
MCU upgrade
Device Info
CaRobotor OS
v5.1
Long press “B”to update system!
1
2
3
update
PLATFORM_CARD.mxnmcu
