14
Carolina Cooker®
844-478-4334
Model M40322 & M49469
January 2021
5.5 Soapy Water Test
• The soapy water test must be performed outdoors
in a well-ventilated area.
• Do not perform the test around open flames, sparks,
lit matches, lighters, or cigarettes.
• Never use an open flame to test for gas leaks.
The “soapy water test”
must
be performed each time:
• the LP cylinder is reconnected, or
• any time the appliance has been moved, or
• at least once per year and/or the appliance has not
been used for more than 60 days.
1.
The regulator shut-off valve and the LP cylinder
valve should be in the OFF or closed position.
2. Prepare a soapy water solution by combining one
part dish washing liquid with three parts water.
SAFETY INSTRUCTIONS
3.
Open the LP cylinder valve.
(with the shut-off valve in the closed position).
4. Apply the soapy water solution to all connections
between the LP cylinder and the shut-off valve.
5. Inspect the connection(s) for bubbles. Close the LP
cylinder valve immediately if bubbles appear.
6. Re-tighten the loose connection(s) and repeat the test.
7. If bubbles continue to appear after tightening any loose
connections, close the LP cylinder valve. Disconnect the
LP cylinder and do not use the appliance. Contact the
local retailer where the appliance was purchased.
8. If the appliance will not be used immediately, close the
LP Cylinder valves and disconnect it.
9. Replace the protective LP cylinder cap when the tank is
not connected.
Summary of Contents for M40322
Page 27: ......