G2300 Instruction Guide
2 |
P a g e
CAROLINA · MILANO
Important safety instructions
Exercise with caution when using your G2300 camera.
Always be aware of your surroundings and avoid injury to yourself and others.
Apply the following precautions with your camera to avoid fire or explosion:
•
DO NOT try to open, puncture, disassemble drop, crush, bend, deform, microwave,
incinerate, paint the camera or any other activity not listed in this Instruction Guide.
•
DO NOT insert any foreign objects into any opening on the camera, e.g. USB port.
•
DO NOT use for any reason the camera if it has been damaged e.g. affected by
water, cracked, or deformed.
•
DO NOT Disassemble or puncture the integrated camera’s battery, since this can
cause an explosion or fire.
•
DO NOT dry the camera with an active heat source such as a hair dryer, microwave
oven or oven.
•
DO NOT place direct flame sources, such as gas flames or lighted candles near the
camera.
•
DO NOT handle the camera charger or the USB cable plugs with wet hands.
•
During charging, place it in a well ventilated location, away from heat sources
.
Failure to comply with these precautions can result in electric shock
.
Only use chargers marked: Output 5V with 1A up 2.1A.
If you are not familiar with the charger’s specifications (voltage and current), use the
supplied USB cable to charge the camera from your computer.
DO NOT place
the Camera in close proximity to strong magnetic forces and keep distance
from objects that transmit strong radio-waves. Avoiding this precaution, may result in a
faulty or degraded camera performance.
DO NOT
place the Camera close to high temperature source or subjected to direct sunlight.
