G2300 Instruction Guide
9 |
P a g e
CAROLINA · MILANO
Getting started
Insert the Micro SD memory card
Insert the Micro SD memory card 4GB up to 32GB class 10 (not included)
to the SD card socket on the camera as shown in the image.
Use flat item like a credit card to insert the memory card.
Battery charging
Connect the supplied USB cable to the camera.
(Micro USB connector) and plug the USB end to a USB charger or Computer.
Remark:
Connecting the camera to a computer USB port enables only charging and
file coping.
Charging status:
Flashing Power LED – charging the battery
Steady Power LED – the battery is fully charged
Charging time for a new battery is 2-3 hours (depends on the charger)
Turning-on/off the G2300 camera
Note:
If charged from a Computer USB port, you must disconnect the camera from the computer in
order to turn it on
ON- Press on the Power button for 2-3 seconds and the Power led will turn on
OFF- Press on the Power button for 2-3 seconds and the Power led will turn off