12
Carolina Spas™
OWNER'S MANUAL
INITIAL OPERATING INSTRUCTIONS
Start-Up and Refill Procedures
Your Carolina Spas™ model has been tested at the manufacturing plant to ensure that all of the
spa functions operate . During the test procedure, a small amount of water may have remained in
the spa plumbing . Through the shipping process water may have spotted the spa shell . You may
need to wipe down the shell with a soft cloth . Please read and follow the start-up instructions to
ensure a successful start-up or refill .
•
Inspect and clean spa shell of any debris
• Do not turn power on to spa unless filled with water to appropriate level (See Page
13) . The spa pack must never be operated without water in the spa; serious damage to
the heater and/or pump(s) may result .
• Do not fill spa with water before checking the items below (items may become loose
in transit):
• Do not fill spa with hot water . This may cause a false error code to the temperature sensor .
A
A
A.
Hand tighten unions at the pumps
B.
Tighten drain valve
Note:
The Drain Valve is left open for
shipping and must be closed before filling spa .
C.
Tighten unions on heater
B
!
!
C
C
C
C
(LE)
(SE)
