9
8
COMPATIBLE COMPRESSORS
GUIDELINES FOR PROPER USE AND OPERATION
Be sure to use a proper air compressor with CARPENTER Air Tools. The compressor should be able to
supply a minimal air delivery of 4.1 CFM @ 90 PSI to ensure the compressor can run continuously with
the CARPENTER Pin Nailer.
Model No. CP635 contact us 1-888-666-1887
KEY PARTS DIAGRAM
TECHNICAL INFORMATION
1
Pin Nailer
6
Regulator
2
Quick connector
7
Filter
3
Quick coupler
8
Cut -off valve
4
Air hose
9
Air compressor
5
Lubricator
No. Description
No. Description
•It is recommended that a filter-regulator-lubricator be used and be located as close to the tool
•If a filter-regulator-lubricator is not installed, place up to 6 drops of compressor oil into the air
inlet plug before each use.
•If a filter-regulator-lubricator is installed, keep the air filter clean. A dirty filter will reduce the
air pressure to the tool, which will cause a reduction in power, efficiency, and general
•Verify that all of the connections in the air supply system are sealed in order to prevent air leakage.
Read and follow all the safety instructions at the beginning of this manual and inspect the
air-powered nailer prior to each use in order to ensure that the proper power source is being used
and verify that the tool is in proper working order
1
2
5
7
3
4
3
6
8
9
1
9
10
11
12
13
14
10
11
12
13
14
15
16
15
16
1
2
2
3
3
4
4
5
5
6
6
7
8
7
9
8
Top Cover
Piston O-Ring
Piston
Driver Blade
Body
Nose
Outlet
Trigger
Magazine
Magazine Cover
Lock Lever
Stop Lever
Hook
Air Plug
Double Trigger
Valve
