23
Troubleshooting
Problem:
Remote control does not work.
Cause:
The ON/OFF-power switch is
turned “OFF”.
Solution:
Turn the ON/OFF-power switch “ON”.
Cause:
The batteries have been wrongly
inserted.
Solution:
Check if the batteries have been
correctly inserted.
Cause:
The batteries do not have enough
power.
Solution:
Insert new batteries.
Problem:
The Quadrocopter cannot be con-
trolled with the remote control
Cause:
The power switch on the remote
control is turned “OFF”.
Solution:
First turn the power switch on the
remote control “ON”.
Cause:
The remote control is possibly not
correctly frequency bound with the receiver
on the Quadrocopter.
Solution:
Please carry out the binding pro-
cedure as described in “Checklist for flight
preparation“.
Problem:
The Quadrocopter does not start.
Cause:
The ‚Start rotors‘ button has not
been pressed on the controller.
Solution:
Press the ‚Start rotors‘ button on
the controller.
Problem:
The Quadrocopter does not lift.
Cause:
The rotor blades rotate too slowly.
Solution:
Slide the gas lever up.
Cause:
The battery´s power is not sufficient.
Solution:
Charge the battery (see chapter
“Charging the battery”).
Problem:
During flight, the Quadrocopter
loses speed and height without any obvious
reason.
Cause:
The battery is too weak.
Solution:
Charge the battery (see chapter
“Charging the battery”).
Problem:
The quadrocopter only flies in a cir-
cle or turns over on starting.
Cause:
Rotor blades incorrectly fitted or
damaged.
Solution:
Fit rotor blades / replace rotor
blades as described in
21
22 23
.
Errors and changes excepted
Colours / final design – changes excepted
Technical changes and design-related changes excepted
Pictograms = symbolic photos
ENGLISH
