5-126
Axxius 800 - Release 2.2
CLI Commands
set
set (router) ppp auth byremote user
Syntax:
set {rtr_card-addr} ppp auth byremote user
{profilename|"protocol-name"}
Example:
set 5 ppp auth byremote user profilename
The example will set the PPP authentication user name for the Router in slot 5
to equal the profile name.
Note: A set (router) ppp auth byremote protocol command must be
completed before this command can be implemented.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{profilename|"protocol-name"}
set (router) ppp auth ofremote protocol
Syntax:
set {rtr_card-addr} ppp auth ofremote protocol
{chap|none|pap}
Example:
set 5 ppp auth ofremote protocol none
The example will set the Router in slot 5 to not allow PPP authentication of this
Axxius by the Router.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{chap|none|pap}
profilename
Use the profile name as the CHAP or PAP user name.
"protocol-name"
The CHAP or PAP user name. A maximum of 16 characters,
enclosed in quotes.
chap
Set to the CHAP protocol.
none
The remote PPP device cannot authenticate this Axxius (default).
pap
Set to the PAP protocol.
Summary of Contents for Network Device Axxius 800
