Axxius 800 - Release 2.2
5-131
CLI Commands
set
set (router) reboot
Use the set (router) reboot command to set automatic reboot after an upload of code or
configuration file.
Syntax:
set {rtr_card-addr} reboot {code|config}
{disable|enable}
Example:
set 5 reboot both disable
Disable automatic reboot after upload for the Router in slot 5.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{code|config}
{disable|enable}
set (router) rip
Use the set (router) rip command to specify RIP packets to transmit and receive.
Syntax:
set {rtr_card-addr} rip {recv|send} {v1|v2|v1and2}
Example:
set 3 rip recv v1
The example will configure receive RIP on the Router card in slot 3 to V1.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{recv|send}
{v1|v2|v1and2}
code
Automatic reboot after code upload
config
Automatic reboot after configuration upload
disable
Will disable automatic reboot
enable
Will enable the automatic reboot after upload of a file
recv
Set RIP receive version
send
Set RIP send version
v1
Set RIP to version 1
v2
Set RIP to version 2
v1and2
Set RIP to version 1 and version 2
Summary of Contents for Network Device Axxius 800
