Axxius 800 - Release 2.2
5-145
CLI Commands
set
set (router-lan) rip
Use the set (router-lan) rip commands to specify RIP for the specified LAN interface.
set (router-lan) rip ip
Use the set (router-lan) rip ip command to specify the IP RIP for the specified LAN
interface.
Syntax:
set {rtr_lan-addr} rip ip {both|neither|recv|send}
Example:
set 2:1 rip ip send
The example will set RIP on the local LAN interface on slot 2 to send.
{rtr_lan-addr}
The Router address is in the form {slot:port} or {slot "profile-name"}.
{both|neither|recv|send}
slot
The slot number (1-8) that contains the Router card.
port
Port number of the Router.
"profile-name"
The profile name for the Router interface. Name must be enclosed
in quotes, with a maximum length of 11 characters.
both
Enable IP RIP (or IPX RIP and SAP) in both directions.
neither
Shut IP RIP (or IPX RIP and SAP) off completely.
recv
Enable IP RIP (or IPX RIP and SAP) in the receive direction only.
send
Enable IP RIP (or IPX RIP and SAP) in the send direction.
Summary of Contents for Network Device Axxius 800
