4-10
Axxius 800 - Release 2.2
Configuration
Basic System Setup
Set Up a Single Channel POTS card
Use the following commands to set up a POTS card.
Change the IP Address of the DS0 Management Channel
Use the following commands to change the IP over DS0 Management Channel for the
Axxius 800.
Command
Description
set {fxsPS-addr|fxsPSM-addr}
{ls|lsrb}
Set the signaling option for the port. See the
set (fxsPS or fxsPSM) command for details.
set {fxsPS-addr|fxsPSM-addr}
rxgain {n}
Set the receive gain/loss in dB. See the set
(fxsPS or fxsPSM) command for details.
set {fxsPS-addr|fxsPSM-addr}
txgain {n}
Set the transmit gain/loss in dB. See the set
(fxsPS or fxsPSM) command for details.
Command
Description
set ipds0 down
Set the DS0 management channel down
set ipds0 ip address {ip-addr}
Set the DS0 management channel IP address.
set ipds0 up
Set the DS0 management channel up.
Summary of Contents for Network Device Axxius 800
