62-69137-00
8
4. RECOMMENDED TRANSPORT
TEMPERATURES
Below are some general recommendations on product
transport temperatures and operating modes for the
unit. These are included for reference only and should
not be considered pre-emptive of the set-point
required by the shipper or receiver.
More detailed information can be obtained from your
Carrier Transicold dealer.
Product Set point range
Bananas 15°C (60°F)
Fresh fruits and Vegetables +4°C ~ +6°C (+39°F ~ +43°F)
Fresh meats and seafood +2°C (+36°F)
Dairy products +2°C ~ +6°C (+36°F ~ +43°F)
Ice
-20°C (-4°F)
Frozen fruits and vegetables -18°C (0°F)
Frozen meats and seafood -20°C (-4°F)
Ice cream -25°C (-13°F)
It is essential to shut down the compartment during the
periods when the doors are open, in order to maintain
the temperature of the cargo in the other compartments
and keep the unit operating correctly.
5. DISPLAY BOARD
CITIMAX series provides two different display boards,
DIN display board and SMART display board, as the
following pictures show:
3
4
8
5
6
7
9
DIN Display
5
2
4
7
9
10
11
3
6
8
SMART Display
5.1. Cab control description
Keep the fold out sheet while reading the
instructions.
This functional accessory simplifies all control
operations. From your seat, you can carry out all the
control operations: shut-down, automatic start-up,
adjusting the set point, defrost, program to customize
unit operation to your own requirements, manage error
messages in event of malfunction.
You can display the box temperature and see whether
the set point is being maintained by checking the blue
or orange indicator. The malfunction indicator lights
up red in the event of malfunction. When the battery
voltage is too low, a fail-save safety system shuts
down the unit. Unit restart is automatic and
time-delayed if the voltage rises to the normal level.
DIN
SMART
1. Display
4 digits
4 digits
2. OFF key
3. Manual
defrost key
4. ON key
5. Cooling
operation LED
6. Heating
operation LED
7. Defrosting
operation LED
8. Malfunction
LED
9. + key
10. SET key
11. - key
