2
GENERAL
The 40VMZ reheat ducted indoor fan coil unit offers simple operation and long service with proper installation, operation, and regular
maintenance. The equipment is initially protected under the manufacturer's standard warranty; however, the warranty is provided under
the condition that the steps outlined in this manual for initial inspection, proper installation, regular periodic maintenance, and everyday
operation of the unit be followed in detail. This manual should be fully reviewed in advance before initial installation, startup, and any
maintenance. Contact your local sales representative or the factory with any questions BEFORE proceeding. See Fig. 1 for the model
number nomenclature. Table 1 shows components that may or may not be used for a particular installation. Table 2 lists physical data for
each unit sizes. Figure 2 show the unit's dimension. Figs. 3 - Fig. 7 show fan performance.
LEGEND
VRF - Variable Refrigerant Flow
Fig. 1 —Model Number Nomenclature
Table 1 —Components Shipped with Unit
LEGEND
MDC - Multi-port Distribution Controller
NAME
OUTLINE
QUANTITY
FUNCTION
PQ connection wire
2
Connect outdoor unit, indoor unit, and sub MDC
Pipe insulation material
2
Heat insulation
Condensate connection
1
For drainage (optional)
Clamp
1
Connect the drain hose to the condensate connection
Copper nut
2
Use for pipe connection
Copper pipes
2
Use for inlet and outlet connection
Display
1
Operation and error display
No Beep Harness
1
Prevent beeping noise
