5
Power Consumption
Power Consumption
LED-Brightness
Current draw (idle)
Current draw (peak)
Model: LenelS2 Readers - 5000 Series
LED-Bar
Backlight
12 VDC
24 VDC
12 VDC
24 VDC
Standard 13.56 MHz with keypad
Low
Low
50 mA
40 mA
147 mA
99 mA
Standard 13.56 MHz with keypad
Medium
Low
50 mA
40 mA
184 mA
116 mA
Standard 13.56 MHz without keypad
Low
Low
50 mA
40 mA
135 mA
94 mA
Standard 13.56 MHz without keypad
Medium
Low
50 mA
40 mA
172 mA
111 mA
Standard 13.56 MHz/125 kHz with keypad
Low
Low
90 mA
60 mA
187 mA
119 mA
Standard 13.56 MHz/125 kHz with keypad
Medium
Low
90 mA
60 mA
224 mA
136 mA
Standard 13.56 MHz/125 kHz without keypad
Low
Low
90 mA
60 mA
175 mA
114 mA
Standard 13.56 MHz/125 kHz without keypad
Medium
Low
90 mA
60 mA
212 mA
131 mA
Standard 13.56 MHz/125 kHz SF/2F version with keypad
Low
Low
90 mA
45 mA
163 mA
91 mA
Standard 13.56 MHz/125 kHz SF/2F version with keypad
Medium
Low
90 mA
45 mA
181 mA
94 mA
Standard 13.56 MHz/125 kHz SF/2F version without
keypad
Low
Low
90 mA
45 mA
159 mA
89 mA
Standard 13.56 MHz/125 kHz SF/2F version without
keypad
Medium
Low
90 mA
45 mA
177 mA
92 mA
Slimline 13.56 MHz with keypad
Low
Low
50 mA
40 mA
164 mA
108 mA
Slimline 13.56 MHz with keypad
Medium
Low
50 mA
40 mA
217 mA
135 mA
Slimline 13.56 MHz without keypad
Low
Low
50 mA
40 mA
152 mA
103 mA
Slimline 13.56 MHz without keypad
Medium
Low
50 mA
40 mA
205 mA
130 mA
Slimline Economy 13.56 MHz without keypad
Low
Low
35 mA
N/A
92 mA
N/A
Slimline Economy 13.56 MHz without keypad
Medium
Low
35 mA
N/A
114 mA
N/A
The above values are excluding heater consumption which is variable and depending on configu-
ration settings. Default value is 220 mA at 12 VDC but can be configured in 20 mA intervals
from minimum 120 mA to maximum 300 mA. When the heater is set in automatic mode, the
heater will be activated when the internal temperature of the reader is below +1°C, the heater will
automatically deactivate when the internal temperature e5°C.
Depending on the heater consumption setting the time it will take for the reader to 5°C
will vary- a higher power consumption setting will reduce the time required to heat
the reader.
Current draw (idle) is defined as reader connected to power, no LED’s lit, buzzer is
not sounding and no reading of credential or key pressing is processed by the reader.
Current draw (peak) is defined as reader powered with both backlight and LED frame lit (Yel-
low), buzzer is sounding and reader is reading a credential while simultaneously a key pressing is
processed.