background image

 

 

— Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any
other appliance.

— WHAT TO DO IF YOU SMELL OIL:

— Do not try to light any appliance.

— Do not touch any electrical switch; do not use

any phone in your building.

• Immediately call your fuel supplier from a

neighbor’s phone. Follow the fuel supplier’s
instructions.

• If you cannot reach your fuel supplier, call the

fire department.

— Installation and service must be performed by a

qualified installer, service agency or the fuel
supplier.

WARNING: If the information in this manual

is not followed exactly, a fire or explosion may
result causing property damage, personal injury or
loss of life.

!

 

Do not use this furnace if any part has been under 
water. Immediately call a qualified service techni-
cian to inspect the furnace and to replace any part 
of the control system and any oil control which 
has been under water.

 

58CLA

 

OIL FURNACE

 

USER’S INFORMATION MANUAL FOR THE OPERATION AND 
MAINTENANCE OF YOUR NEW OIL-FIRED FURNACE

 

NOTE TO INSTALLER: THIS MANUAL MUST BE LEFT WITH THE EQUIPMENT USER.

Summary of Contents for 58CLA









Reviews: