32
THE BASIC SETUP SCREEN
A11082
Fig. 17 -- Filter Change Required
3. When the
RESET
button is pressed, the “Change Filter in” value will reset
to its original value, and the reminder will go away. Therefore, the filter
should be replaced when
RESET
is pressed.
4. Press the
DONE
button to save the changes and return to the Home
Active Screen, or press the
CANCEL
button if you are not ready to
replace the filter, which will ignore the reset.
5. If the
RESET
button was not pressed and either the
CANCEL
or
DONE
buttons are pressed, the filter reminder shall remain visible on the Home
Active screen with an open envelope next to the
FILTER
button. This
indicates the message has been read, but the filter timer has not been
reset. See Fig. 18.
Summary of Contents for ComfortChoice Touch
