Carrier RG10A11BGEF, Owner'S Manual

3. HOW TO USE BASIC FUNCTIONS

3.1 BASIC OPERATIONS

AUTO

Mode

Select AUTO mode 

Set your desired temperature 

NOTE:

1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of 

    Cool, Heat or Fan by sensing the difference between the actual room temperature and setting 

    temperature. 

2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of 

    Cool or Fan by sensing the difference between the actual room temperature and setting temperature. 

3. In AUTO mode, fan speed can not be set.

Mode

Turn on the air conditioner

COOL

   or

HEAT

Mode

Select COOL/HEAT mode 

Set the temperature 

Turn on the air conditioner

Set the fan speed

 DRY

Mode

Select DRY mode 

Set the temperature 

NOTE:

In DRY mode, fan speed can not be set since it has already been automatically controlled.

Turn on the air conditioner

 FAN

Mode

Select FAN mode 

Turn on the air conditioner

Set the fan speed

Before operation, please ensure the unit is plugged in and power is available. 

ATTENTION

Mode

Mode

Mode

2. DISPLAY AND BUTTONS

06

05

Scrolls through operation 

functions as follows:

The selected symbol will flash on

the display area, press the OK 

button to confirm.  

Fresh(       )       Sleep(        )     

Follow Me(       )

AP mode(          )      Fresh

....









2.2 BUTTONS

On/Off

Press to start operation. 

Press again to stop.

Mode

Press the mode button to 
switch the mode in turn.

X-ECO 

My Mode

Press to memorize or resume 

your favorite pre-settings. 

LED

LOCK

Fan Speed

Press to select the fan speed.

Temperature UP

Increases temperature in 

1 C  increments. 

Max. Temp. is 30 C .

Press to turn on/off the LED 

display. Pressing 5 more seconds 

to alternate the indoor display 

between setting temperature 

and room temperature

(Model dependent).

Decreases temperature in 1 C
increments. Min. Temp. is 17 C.

Temperature Down

Swing

X-ECO

My

Mode

NOTE: 

HEAT mode is not supported 

  by the cooling only appliance.

SET

OK

Used to confirm the selected 
functions.

TIMER

   Set timer to turn unit on or off.

Clean

Used to start/stop the Self Clean 

or Active Clean function.

(Model dependent).

Press together Clean button and 

Turbo button at the same time more 

than 5 seconds to activate Lock 

function.

MODEL: RG10A5(U)/BGEF

               RG10A11(U)/BGEF(20-28 C)

Turbo

Enables unit to reach preset 

temperature in shortest possible time.  

Press to enter the energy
efficient mode.

NOTE:

1. Above illustration shows all the features. For actual model, only the relevant parts are shown.

2. Buttons design might be slightly different from the actual one.

Starts and stops the horizontal louver 

movement. Hold down for 2 seconds 

to initiate vertical louver auto swing 

feature(some units).