Carrier RG10A11BGEF, Owner'S Manual

4. HOW TO USE ADVANCED FUNCTIONS

12

11

F.P.

The unit will operate
at high fan speed (while
compressor on) with 
temperature automatically
set to 8 C/46 F.  

Keep pressing Fan button for more than 2 seconds to activate/disable Silence function.

Silence

Due to low frequency operation of compressor, it may result in insufficient cooling and heating capacity. 
Press ON/OFF, Mode, Sleep button,  turn on F.P.or Self clean function while operating will cancel silence
function.(Model dependent)

2

2s

Clean

Press this button to start/stop Self clean or Active clean function(Model dependent).

Clean

Active clean function(some units) :

The Active Clean Technology washes away dust, mold, and grease that may cause odors 

when it adheres to the heat exchanger by automatically freezing and then rapidly thawing 

the frost. When this function is turned on, the indoor unit display window appears “CL”, 

after 20 to 130 minutes, the unit will turn off automatically and cancel Clean function.

Self clean function(some units) :

Airborne bacteria can grow in the moisture that condenses around heat exchanger in the 

unit. With regular use, most of this moisture is evaporated from the unit. Under Self clean 

operation, the unit unit will clean itself automatically. After cleaning, the unit will turn off 

automatically. 

Note

: You can only activate this function in COOL or DRY or AUTO COOL(some units) mode.

Press this button 2 times under HEAT Mode and setting temperature of 17 C or 20 C to activate the freeze 
protection function. It will help to keep the room above 0 C (freezing point) in severe cold winter.
Press On/Off, Sleep, Mode, Fan and Temp. button while operating will cancel this function.

Note:This function is for heat pump air conditioner only. 

Keep pressing this button more than 5 seconds, the 
indoor unit will display the actual room temperature.
Press more than 5 seconds again will revert back to 
display the setting temperature(Model dependent).

LED

Press LED button

Press this button to turn 
on and turn off the display
on the indoor unit.

LED

Press this button more than 5 seconds

Turbo

Press this button 

Press this button to activate Turbo feature. It enables the unit to reach the set temperature in the shortest time. 
Press it again to disable it.(Model dependent)

The unit will operate at 
the biggest capacity 
output to reach the 
setting Temp. quickly.

My

Mode

Press this button 

My Mode function enable you to memorize or restore your favorite settings (mode, temperature and fan 
speed). 

Press this button more than 2 seconds

The unit will restore to
the setting you made
last time.

The unit will memorize
the current setting 
mode, Temp., fan). 

LED

5s

2s

My

Mode

My

Mode

Turbo

Press this button 2 times during one second under HEAT Mode and setting temperature of 
17 C(for models of RG10B2(U)/BGEF and RG10A5(U)/BGEF) or 20 C(for models of
 RG10B10(U)/BGEF and RG10A11(U)/BGEF)

.