7.2 -
Configuration menu (CONFIG1)
Icon
Displayed text*
Description
Name
General Configuration
General configuration parameters
GEN_CONF
Pump Configuration
Pump configuration
PUMPCONF
User Configuration
User configuration
USERCONF
Reset Configuration
Reset configuration
RESETCFG
Schedule Menu
Schedule settings
SCHEDULE
Holiday Menu
Holiday settings
HOLIDAY
Date/Time configuration
Date/Time settings
DATETIME
*Displayed in English by default.
CAUTION: Since specific units may not include additional
features, some tables may contain parameters that cannot
be configured for a given unit.
General Configuration Menu – GEN_CONF
No. Name
Status
Default Unit Displayed text *
Description
1
prio_cir
0 to 2
0
-
Cir Priority Sequence
Circuit priority
2
0=Auto, 1=A Prio
0 = Automatic circuit selection
1 = Circuit A priority
3
2=B Prio
2 = Circuit B priority
4
ramp_sel
no/yes
no
-
Ramp Loading Select
Ramp loading selection
5
off_on_d
1 to 15
1
min Unit Off to On Delay
Unit Off to On delay
6
lim_sel
0 to 2
0
-
Demand Limit Type Select Demand limit type
7
0 = None
0 = None
8
1 = Switch Control
1 = Switch control
9
2 = 4-20mA Control
2 = 4-20mA control
10 nh_start
00:00
00:00
-
Night Mode Start Hour
Night mode start hour
11
nh_end
00:00
00:00
-
Night Mode End Hour
Night mode end hour
12 nh_limit
0 to 100
100
%
Night Capacity Limit
Night capacity limit
13 curr_sel
no/yes
no
-
Current Limit select
Current limitation select
14 ice_cnfg
no/yes
no
-
Ice Mode Enable
Ice mode
15 curr_max
0 to 4000
2000
A
Maximum Current Limit
Maximum current limitation
16 shortcyc
no/yes
no
-
short cycle management
Short cycle management
17 al_rever
no/yes
no
-
Reverse Alarms Relay
Reverse alarm/alert signals
18 capre_en
no/yes
no
-
Enable capacity recovery
Capacity recovery in case of power outage
19 capre_t
0 to 10
0
min Capa rec max off time
Maximum time with power off for capacity recovery
*Displayed in English by default.
7 - DETAILED MENU STRUCTURE
22
