Assembly
Pin Wheels to Frame
Push the button on the end of the axle.
Insert the axle into a wheel.
Put the rubber hub cap over the axle end.
Push center of rubber hub cap, and insert
axle & wheel into the trailer frame.
NB:
Once fully inserted, pull the wheel
to make sure it is secure. If they pull away
the axle may need to be adjusted longer.
If the axle length needs adjusted see
“adjusting axle length” on page 8.
�������
��
���� ����������
������
��� ������ ����
����� ���������
���� ���� ��� ��� ��
����� � ����� ����� �����
����� ������� ����
��� ��� �� �����������
� ��� ������� ����� ����
���� ���������
��� ���� ��� ������� ���� �� �������
� �������� ���������� �� ������
���� ���������
��� ���� ��� ������� ���� ��
������� � ����� �����������
�����
��� ���� ��� ������� ���� ��
������� � ����� �����������
�������
��
���� ������� ��� �������
��
���� �� ����� ��
������ ������ �� ��� ���� ����������� ��� ���
��� �� ���������� ���� �
��
�������
Page
4
6.
Push the button on the end of the axle,
and insert into the wheel.
7.
The nutted end of the axle should sit in
the recessed side of the wheel
9.
Push the center of the hub cap and
insert the wheel into the trailer frame
10.
Pull at the wheel to ensure it is se-
cure. See page 8 if it isn’t
8.
Insert a rubber hub cap to cover the
axle end
