CARGO CONTAINERS
The Y-Frame can accept most loads. You
can bolt containers directly to the frame
or load bed, strap things down, or fi t a
box with our box quick release system.
Contact custom@carryfreedom.com for
really unusual loads.
Loading directly
Any load can be tied down onto the anti
slip surface of the load bed. The four holes
in the load bed can be used as tie down
points, as can the aluminium frame below
the load bed. Regularly check the load is
secure and has not slipped.
Bags
Most bags can be strapped directly to the
load bed using the enclosed straps, but
the grip surface can abrade bags quickly.
Place a matt between bag and the trailer,
if this is a problem.
Water proof Ortlieb Rack Packs can
clip directly to the load bed, the 48L
for the Y-Small, and the 90L for the
Y-Large. See www.Ortlieb.com or
www.CarryFreedom.com for full details.
Boxes
Mant fl at bottomed boxes will fi t. The
maximum box footprint is around 450mm
X 900mm for the Y-Small and 600mm X
900mm for the Y-Large.
A box may be bolted permanently to the Y-
Frame or fi tted with our box quick release.
The Center of the box should lie ahead of
the trailer axle, and the front of the box
must be clear of your bicycles wheel.
To fi t a box permanently secure it at least
four points, as close to its corners as
practical. Boxes may need penny washers
fi tted to stop the bolt pulling through the
box’s base.
Secure weak boxes to the load bed, strong
boxes may be bolted directly to the frame.
�������
��
���� ����������
������
��� ������ ����
����� ���������
���� ���� ��� ��� ��
����� � ����� ����� �����
����� ������� ����
��� ��� �� �����������
� ��� ������� ����� ����
���� ���������
��� ���� ��� ������� ���� �� �������
� �������� ���������� �� ������
���� ���������
��� ���� ��� ������� ���� ��
������� � ����� �����������
�����
��� ���� ��� ������� ���� ��
������� � ����� �����������
�������
��
���� ������� ��� �������
��
���� �� ����� ��
������ ������ �� ��� ���� ����������� ��� ���
��� �� ���������� ���� �
��
�������
Page
6
16.
Tied down load
18.
Box bolted to the load bed
17.
Bag. Ortlieb Rack Pack compression
straps feed through the Load bed holes
to easily hold the bag on the trailer
